01
Install the counter battens
Fix counter battens to the intended wall surface at intervals of approximately 30–40 cm. Make sure the resulting surface is straight and even.
Larch Tongue & Groove Wall Cladding – Hewn & Brushed
145 mm width × 2000 mm length × 19 mm thickness
907,00 kr
Skip to product information
Larch Tongue & Groove Wall Cladding – Hewn & Brushed
907,00 kr
Bring natural warmth and rustic character to interiors and façades with solid larch tongue & groove wall cladding featuring a hewn and brushed surface. The pronounced grain, knots and textured finish give the boards an authentic, lively appearance.
Product highlights
- Solid larch
- Hewn & brushed rustic surface
- Tongue & groove profile for clean installation
- 145 mm board width / 135 mm cover width
- 195 mm board width / 185 mm cover width
- 19 mm and 23 mm thickness depending on variant
- Short lengths up to 1960 mm available with tongue & groove on the end faces
- Suitable for walls, ceilings and façades
- Suitable for interior and exterior applications with appropriate installation
- Special lengths available on request
- Sold per square metre
Larch is a natural material. Grain, knots, colour variation and surface differences are part of the characteristic appearance of each board.
Area planning
How many square metres of wall cladding do you need?
Calculate the required area directly here. Add one or more walls, subtract windows, doors and other openings, and include an additional waste allowance if required.
01
Wall areas
02
Windows, doors & openings
Openings are automatically deducted from the total wall area.
03
Waste allowance
Depending on the project, we recommend an additional allowance for cutting and fitting.
Wall
See it. Feel it. Decide.
Order a sample before you decide
Natural wood is best judged in person. Order a matching sample to assess the real colour, texture and surface before planning a larger wall or interior project.
Matching sample
Wood Wall Cladding Samples
Solid Larch Tongue & Groove Wall Cladding – Hewn & Brushed
57,00 kr
The sample is intended to help you assess the material and surface before ordering larger quantities.
Installation
Tongue & groove installation guide
Tongue & groove installation guide
Open the guide to see the complete installation process for our tongue & groove wall cladding.
02
Check spacing and fixing
Check the spacing of the battens and make sure the substructure is fixed correctly for the particular wall construction.
03
Align the first rows
Use a spirit level when installing the first two rows so that the wall cladding starts straight.
04
Sort the boards by appearance
View the surface structure and colour from a distance of approximately 2–4 m. If necessary, exchange individual boards until the desired overall appearance is achieved. Have screws and a cordless screwdriver ready.
05
Fix through the inner groove edge
Screw the boards to the counter battens through the inner edge of the groove. The fixing should then be covered by the following board. Alternatively, the boards can also be stapled in the groove.
06
Secure every third row
According to our installation guide, it is sufficient to secure every third row to the counter battens.
07
Close the joints carefully
Adjust the position of the boards with a wooden block and hammer. The boards should fit firmly together. Push them together until no small open joints remain visible. The tongue is stained in the respective surface colour.
08
Leave an expansion gap
Leave a gap of approximately 8–10 mm to adjoining walls. This gives the wood room to move as it adjusts to changes in moisture.
Questions about installation? Contact us at info@Vintage-Holz.de.
Expert answers
Tongue & groove cladding – expert answers
Practical answers for planning and installing our tongue & groove wall cladding.
Why is a substructure used for tongue & groove wall cladding?
The counter battens create a straight, secure fixing plane for the boards. In our installation method, the battens are mounted at approximately 30–40 cm intervals.
Where are tongue & groove boards fixed so the screws remain hidden?
The boards are screwed through the inner edge of the groove into the substructure. The next board then covers the fixing point, creating a clean finished surface.
Why are the first rows especially important?
The first rows determine the alignment of the entire wall. They should therefore be checked carefully with a spirit level before the rest of the cladding is installed.
Why should the boards be sorted before installation?
Natural wood varies in colour, structure and grain. Viewing and arranging the boards from roughly 2–4 m away before fixing them helps create a balanced overall appearance on the finished wall.
How much edge clearance should be left with tongue & groove cladding?
Leave approximately 8–10 mm to adjoining walls. This expansion gap gives the wood room to move as indoor humidity changes.