ALM M Reclaimed Wood 3D Wall Panels
ALM M reclaimed wood wall panels are made from authentic aged fir and pine, with varying colours, grain patterns and material thicknesses that create a lively natural 3D effect. Each panel has its own unique patina, knots and traces of age.
For installation, allow the panels to acclimatise for 1–2 days. Use a suitable water-free flexible polymer-based mounting adhesive on a clean, dry and level substrate. Mechanical fixing may also be possible depending on the substrate.
Natural colour variation, knots, cracks and ageing marks are characteristic features of genuine reclaimed wood and are not defects.
Area planning
Calculate the required area directly here. Add one or more walls, subtract windows, doors and other openings, and include an additional waste allowance if required.
01
02
Openings are automatically deducted from the total wall area.
03
Depending on the project, we recommend an additional allowance for cutting and fitting.
See it. Feel it. Decide.
Natural wood is best judged in person. Order a matching sample to assess the real colour, texture and surface before planning a larger wall or interior project.
The sample is intended to help you assess the material and surface before ordering larger quantities.
Open the guide to see the complete installation process for the adhesive-mounted wood panels.
We recommend leaving the wood panels unpacked in the new room for 1–2 days before installation so that they can acclimatise to the room climate. Use only a water-free, flexible polymer-based assembly adhesive. Do not use water-based dispersion adhesives, as they can cause the panels to deform.
Make sure the installation surface is relatively flat. The substrate must also be clean, dry and free of dust. The product is intended for rooms with a relative humidity of approximately 40–60%. Because the panels are made from natural wood, installation in areas with high humidity is not recommended.
When choosing the adhesive, follow the adhesive manufacturer's specifications for the substrate and the required amount. Apply the adhesive as specified and make sure adhesive is also applied near the corners of the panels.
The panels can be arranged in your own pattern: horizontally, vertically, diagonally or in another layout of your choice. Plan the layout before fixing the panels permanently.
Questions about installation? Contact us at info@Vintage-Holz.de.
Expert answers
Practical guidance for adhesive-mounted ALM and Kitzbühel natural wood panels.
Use a water-free, flexible polymer-based assembly adhesive that is suitable for both the wall substrate and natural wood panels. Water-based dispersion adhesives should be avoided.
Natural wood adjusts to the climate of the room. Leaving the unpacked panels in the installation room for 1–2 days helps the material adapt before permanent bonding.
The substrate should be relatively flat, clean, dry, stable and free of dust. A sound substrate is essential because the adhesive bond is only as reliable as the surface beneath it.
Yes. The panels can be arranged horizontally, vertically, diagonally or in another planned pattern. It is useful to lay out the pattern visually before permanently bonding the panels.
A relative indoor humidity of around 40–60% is a suitable target range. Very damp environments should be assessed carefully before installation because natural wood reacts to moisture.